Difference between revisions of "Labeling fruit trees"
From RAWiki
m (Ahoussney moved page Labeling Fruit Trees to Labeling fruit trees) |
|||
| Line 9: | Line 9: | ||
#On the label, mark the year the tree was planted or marked, the genus species, or common name, and any pertinent information such as how well the tree is bearing fruit, etc. | #On the label, mark the year the tree was planted or marked, the genus species, or common name, and any pertinent information such as how well the tree is bearing fruit, etc. | ||
#In the optimal scenario, input the tree into an online mapping database by taking a GPS location. | #In the optimal scenario, input the tree into an online mapping database by taking a GPS location. | ||
| + | |||
| + | <youtube>X5BqXnGMmh4</youtube> | ||
Revision as of 22:59, 15 January 2016
To label trees permanently (a label that remains for decades):
- Use electric fence wire as the tie
- Cut a small cut piece of aluminum flashing (3/4"x5" or so) or a piece of a soda can for the label
- Use a scribe or the tip of a 3" screw to scratch the information on the label
- Drill an 1/8" hole in the label with a portable drill
- Stick the wire into the hole, and tie to a solid tree branch by winding the wire around itself like a twist tie, being mindful of how the tree will grow, so as not to restrict the growth in future years
- Lower, side branches are best, leave the wire loop somewhat loose
- On the label, mark the year the tree was planted or marked, the genus species, or common name, and any pertinent information such as how well the tree is bearing fruit, etc.
- In the optimal scenario, input the tree into an online mapping database by taking a GPS location.
