Colorado topbar beehive
From RAWiki
Revision as of 23:08, 8 February 2015 by Ahoussney (Talk | contribs) (Ahoussney moved page Colorado Topbar to Colorado topbar beehive)
The Colorado topbar hive is a product of the Open Source Beehives project. It's a topbar beehive which is designed to be downloaded and "printed out" by a CNC router, commonly found in maker spaces. The hive is designed to be cut out of a single (American) standard 4 foot by 8 foot sheet of 3/4 inch plywood, shipped flat, and assembled using no fasteners or glue.
It was designed by the OpenSourceBeehives team including Jacob Springs Farm's Andre Houssney.
see also[Colorado Topbar]
